5 HP Hydraulic, Dual Stage 6 or 12, Low Flow Hub, All Stainless Steel Fluid Path
(PT100-PM01BCSA)
Basic Description: All stainless fluid path, high power hydraulic, single injector tube, low flow hub, welded stainless basket, stainless spindle.
Typical Uses: Corrosive waste water evaporation.
Purchase: Contact Us to purchase these units or for any questions.
Operational Parameters:
| Droplet Size Range: | 75-125 Microns |
| Flow Rate: | 15 LPM (4 GPM) |
| Normal Speed: | 5000 RPM |
| Largest Particle: | 1.5mm (.060") |
| Max Temperature: | 82° C (180° F) |
| Max Speed: | 5500 RPM |
| Power Required at Max Flow & Normal RPM: | 3.7 Kw (5 Hp) |
| Hydraulic Oil Flow: | 14.4 L @ 5000 RPM (3.8 GPM ) |
| Hydraulic Pressure: | 2500 PSI max |
Design Specifications:
| Primary Stage Hub: | 303 stainless steel |
| Second Stage Basket: | 6 inch (150 mm), 12-mesh, welded stainless |
| Injector Tubes: | One tube, stainless |
| Spindle: | 303 stainless steel |
| Isolator Type: | Red Novitaine ® |
| Motor Type: | 2.8 cc hydraulic |
| Fan Type: | None |
| Guarding: | None |
| Mounting Bail: | None |
| Weight: | 2.3 kg (5 lbs) |
Manuals:
Installation and Operation Manual for Proptec PT100 Series Rotary Atomizer